Commercial Door Handles Deadbolts & Access Control Squamish

MLF SERIES MORTISE LOCKS SHIPPING TO SQUAMISH & AREA:
- LSDA mortise locks provide exceptional strength and durability to any door.
- Typically used in hospitals, schools and commercial buildings, they are well-suited to heavy use environments. Designed to fit standard Type 86 full-mortise cutouts, and equipped with an escutcheon trim, these locks are excellent for new projects and retrofit. The lever trim meets ADA standards for accessibility. Several functions are available, some with integral deadbolt. Mortise locks offer functions that cannot be obtained using cylindrical “key-in-knob” locksets.
- ANSI/BHMA: A156.13 2005 Series 1000, Grade 1.
- UL10C; UBC 7-2-1997.
- Heavy-duty full-case mortise lock.
- Oversize escutcheons, ideal for retrofit.
- Individual lever return springs prevent sagging.
- UL listed for 3-Hour fire doors.
- Supplied with SC4 1-1/4” mortise cylinder.
- Cylinders used for this mortise lock must be 1-1/4” length mortise cylinder.
- Deadbolt: 1” bolt projection.
- Latch: 3/4” projection.
- Supplied with a mortise cylinder except passage and privacy functions locks.
- Door thickness: 1-3/4”.
- Door preparation: Full mortise, see template.
- Escutcheons: 2-1/2” W x 8-1/4” H.
- “Quick Change” Handing: Field reversible.
- Strike: 4-7/8” x 1-1/4”.
- Backset: 2-3/4”.
- Construction: Forged brass levers and escutcheons, zinc chromate steel case, brass latchbolts.
- Style: Ann Arbor.
- Finish: Satin Chrome.

MLF01 - PASSAGE:
- Latch retracted by lever on either side.

MLF04 - ENTRANCE:
- Lock or unlock outside lever using rocker on edge of lock. When locked, inside lever retracts latch, outside access by key.

MLF05 - CLASSROOM:
- Lock or unlock outside lever by key on outside of the door. When locked, inside lever retracts latch.

MLF07 - STOREROOM:
- Inside lever always retracts latch. Outside lever never retracts latch, outside key retracts latch.

MLF12 - APARTMENT/DORMITORY/EXIT WITH ROCKER:
- Latch is retracted by either lever unless outside lever is locked by rocker. In addition, a deadbolt can be projected or retracted by key outside or thumbturn inside. Also, operating inside lever retracts both latch and deadbolt, while outside lever remains locked.

MLF13 - APARTMENT/DORMITORY/EXIT WITHOUT ROCKER:
- Both levers always retract latch. Deadbolt can be projected and retracted by key outside or thumbturn inside. Also, operating inside lever retracts both latch and deadbolt.

MLF19 - PRIVACY:
- Both levers always retract latch. Deadbolt can be projected and retracted by thumbturn inside or emergency release outside. Also, operating inside lever retracts latch and deadbolt.

MLF48 - STOREROOM WITH DEADBOLT:
- Inside lever always retracts latch, and deadbolt if it is extended. Outside lever is rigid, outside cylinder retracts latch, and deadbolt if it is extended. Deadbolt is extended or retracted by inside thumbturn or by outside cylinder.

FUNCTIONS:
Passage - Entrance - Classroom - Storeroom - Apartment/Domitory/Exit Lock with Rocker - Apartment/Domitory/Exit Lock No Rocker - Privacy - Storeroom with Deadbolt.

ACCESSORIES:
- Spindle Kit for MLF Mortise Locks.
- Spring Cage for MLF Mortise Locks.

LF SERIES LEVERSETS:
- ANSI/BHMA A156.2 series 4000, Grade 1 certified.
- Latch: Solid brass 1/2” throw, reversible for RH or LH applications.
- UL/cUL listed for fire rated openings.
- Roses are wrought brass or bronze.
- Backset: 2-3/4”, 2-3/8” available.
- Faceplate adjustable for flat or beveled doors 2-1/4" x 1-1/8".
- Door: Adjustable from 1-3/8” to 2”.
- Strike: 4-7/8" x 1-1/8" ASA.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Case: Corrosion treated heavy gauge, cold-rolled, steel mechanisms.
- Rose: 3-1/2” diameter.
- Lever length: 5-1/4” long.

IC CORE OPTION:
Accepts small format IC Cores from KSP, Kaba Peaks, Falcon & Best. Core not included.

LF2000 – Entrance/Office:
- Pushing and turning inside button locks outside lever requiring use of key until button is manually unlocked. Pushing inside button locks outside lever until unlocked with a key or inside lever is turned. Inside lever always retracts latch.

LF2100 – PASSAGE:
- Both levers always retract latch.

LF2200 – PRIVACY:
- Pushing inside button locks outside lever until inside lever is turned. Emergency tool can be used to unlock outside lever. Inside lever always retracts latch.

LF2400 – STOREROOM:
- Outside lever never retracts latch. Entrance by key only. Inside lever always retracts latch.

LF2500 – CLASSROOM:
- Outside lever is locked and unlocked with a key in the outside cylinder.
- The inside lever always retracts the latch.

LF2800 – CLASSROOM INTRUDER:
- Outside and inside cylinders lock outside lever. Inside lever always retracts the latch.

LF2900 – INSTITUTIONAL:
- Neither lever retracts the latch. A key is required in both the inside and outside cylinder to retract the latch.

BENEFITS OF A “CLUTCH” LEVER:
- A lever lock with a clutch does not stay rigid when it is locked. The lever moves, just like it does when unlocked. However, it does not retract the latch. This “free-wheeling” feature absorbs torque and can extend the life of a lever lock.

FUNCTIONS:
Entrance - Privacy - Passage - Storeroom - Classroom - Classroom Intruder - Institutional.

5000 SERIES LEVERSETS READY TO SHIP TO SQUAMISH & AREA:
- ANSI/BHMA A156.25 series 4000 Grade 1 certified.
- Vandal resistant clutch models available.
- Non-handed.
- Latchbolt: 2-3/4” backset, UL listed 3 hr fire rated.
- Door thickness: 1-9/16” to 2-1/8”.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.

5000 - ENTRANCE/OFFICE:
- Pushing and turning inside button locks outside lever requiring use of key until button is manually unlocked. Pushing inside button locks outside lever until unlocked with a key or inside lever is turned. Inside lever always retracts the latch.

C5000 – ENTRANCE/OFFICE WITH CLUTCH:
- Same operation as 5000.

5100 – PASSAGE:
- Both levers always retract the latch.

5200 – PRIVACY:
- Pushing inside button locks outside lever until inside lever is turned. Emergency tool can be used to unlock outside lever. Inside lever always retracts the latch.

5400 – STOREROOM:
- Outside lever never retracts the latch. Entrance by key only. Inside.
- lever always retracts the latch.

C5400 – STOREROOM WITH CLUTCH:
- Same operation as 5400.

5500 – CLASSROOM:
- Outside lever is locked and unlocked with a key in the outside cylinder. The inside lever always retracts the latch.

BENEFITS OF A “CLUTCH” LEVER:
- A lever lock with a clutch does not stay rigid when it is locked. The lever moves, just like it does when unlocked. However, it does not retract the latch. This “free-wheeling” feature absorbs torque and can extend the life of a lever lock.

IC CORE OPTION:
- Accepts small format IC Cores from KSP, Kaba Peaks, Falcon & Best (Core not included).

FUNCTIONS:
Entrance - Passage - Privacy - Storeroom - Classroom

4000 SERIES KNOBSETS:
- ANSI/BHMA A156.25 series 4000 Grade 1 certified.
- UL listed 3 hour fire rated, 10C/UBC 7-2 positive pressure.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Latchbolt: 2-3/4 backset, UL listed, 2-3/8” UL listed latch available.
- Door thickness: 1-3/8” to 2”.
- Non-handed.

4000 – ENTRANCE/OFFICE:
- Pushing and turning inside button locks outside knob requiring use of key until button is manually unlocked. Pushing inside button locks outside knob until unlocked with a key or inside knob is turned. Inside knob always retracts the latch.

4100 – PASSAGE:
- Both knobs always retract the latch.

4200 – PRIVACY:
- Pushing inside button locks outside knob until inside knob is turned. Emergency tool can be used to unlock outside knob. Inside knob always retracts the latch.

4400 – STOREROOM:
- Outside knob never retracts the latch. Entrance by key only. Inside knob always retracts the latch.

4500 – CLASSROOM:
- Outside knob is locked and unlocked with a key in the outside cylinder. The inside knob always retracts the latch.

IC CORE OPTION:
- Accepts small format IC Cores from KSP, Kaba
- Peaks, Falcon & Best (Core not included).

FUNCTIONS:
Entrance - Privacy - Passage - Storeroom - Classroom - Institutional

GRADE 1 LATCHES & ACCESSORIES IN STOCK READY TO SHIP TO THE SQUAMISH AREA:
5LINK:
- Use in conjunction with a 2-3/4” latch to achieve 5” backset.

LFTDP:
- Includes outside rose, rose liner & inside rose to adapt a LF series lever for a 2-1/4” door.

DEADLATCH:
- UL 2-3/4” 3.
- UL 2-3/4” 32D.
- UL 2-3/8” 26D.

SPRING LATCH:
- UL 2-3/4” 32D.

EXTENSION LATCH:
- 5”.

IC REPLACEMENT YOKES:
- All Except LFC2000IC.

LFC2000IC:
- Thick Door Package for LF Series.

GRADE 2 LATCHES, EXTENSION LINK & CYLINDER:
KEL5:
- Use in conjunction with 2-3/4” latch to achieve 5” backset.

DEAD LATCHES:
- Drive-In 2-3/8” 32D.
- Drive-In 2-3/4" 32D.
- UL 2-3/8" 3.
- UL 2-3/8" 32D.
- UL 2-3/4" 3.
- UL 2-3/4" 32D.

SPRING LATCHES:
- UL 2-3/8" 3.
- UL 2-3/8" 32D.
- UL 2-3/4" 32D.

EXTENSION LINK:
- 5”.

CYLINDER:
- SC1 26D.

800 SERIES “VANCOUVER” LEVERSETS:
- ANSI/BHMA A156.2-2003, series 4000 Grade certified.
- UL listed 3 hr fire rated, UL 10C / UBC7-2 positive pressure.
- Door thickness: 1-3/8” to 2”.
- Latchbolt: 2-3/4” backset, UL listed, 2-3/8” UL listed latch available.
- Non-handed.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Vancouver design: Two-step rose.

BENEFITS OF A “CLUTCH” LEVER:
- A lever lock with a clutch does not stay rigid when it is locked. The lever moves, just like it does when unlocked. However, it does not retract the latch. This “freewheeling” feature absorbs torque and can extend the life of a lever lock.

800 – ENTRANCE/OFFICE:
- Pushing and turning inside button locks outside lever requiring use of key until button is manually unlocked. Pushing inside button locks outside lever until unlocked with a key or inside lever is turned. Inside lever always retracts the latch.

C800 - ENTRANCE/OFFICE WITH CLUTCH:
- Same operation as 800.

810 – PASSAGE:
- Both levers always retract the latch.

820 – PRIVACY:
- Pushing inside button locks outside lever until inside lever is turned. Emergency tool can be used to unlock outside lever. Inside lever always retracts the latch.

830 - EXIT:
- Lever inside, always retracts latch. Blank plate outside.

840 – STOREROOM:
- Outside lever never retracts the latch. Entrance by key only. Inside lever always retracts the latch.

C840 - STOREROOM WITH CLUTCH:
- Same operation as 840.

850 – CLASSROOM:
- Outside lever is locked and unlocked with a key in the outside cylinder. The inside lever always retracts the latch.

C850 - CLASSROOM WITH CLUTCH:
- Same operation as 850.

870 - COMMUNICATING:
- Key in either lever locks or unlocks that lever.

890 - INSTITUTIONAL:
- Both levers always rigid. Key in either lever retracts latch.

IC CORE OPTION:
- Accepts small format IC Cores from KSP, Kaba Peaks, Falcon & Best (Core not included).

FUNCTIONS:
Entrance - Privacy - Passage - Exit - Storeroom - Classroom - Communicating - Institutional.

800 SERIES “EDMONTON” & “CALGARY” LEVERSETS FOR SQUAMISH & AREA:
- ANSI/BHMA A156.2-2003, series 4000 Grade 2 certified.
- UL listed 3 hr fire rated, UL 10C / UBC7-2 positive pressure.
- Door thickness: 1-3/8” to 2”.
- Latchbolt: 2-3/4” backset, UL listed, 2-3/8” UL listed latch available.
- Non-handed.
- Cylinder: Supplied with SC4 6 pin keyway, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Edmonton design: Flat-face rose.
- Calgary design: Flat-face rose with curved lever.

C800 - ENTRANCE/OFFICE WITH CLUTCH:
- Pushing and turning inside button locks outside lever requiring use of key until button is manually unlocked. Pushing inside button locks outside lever until unlocked with a key or inside lever is turned. Inside lever always retracts the latch.

810 – PASSAGE:
- Both levers always retract the latch.

820 – PRIVACY:
- Pushing inside button locks outside lever until inside lever is turned. Emergency tool can be used to unlock outside lever. Inside lever always retracts the latch.

C840 - STOREROOM WITH CLUTCH:
- Outside lever never retracts the latch. Entrance by key only. Inside lever always retracts the latch.

C850 – CLASSROOM WITH CLUTCH:
- Outside lever is locked and unlocked with a key in the outside cylinder. The inside lever always retracts the latch.

BENEFITS OF A “CLUTCH” LEVER:
- A lever lock with a clutch does not stay rigid when it is locked. The lever moves, just like it does when unlocked. However, it does not retract the latch. This “freewheeling” feature absorbs torque and can extend the life of a lever lock.

FUNCTIONS:
Edmonton Style: Entrance - Passage - Privacy - Storeroom.
Calgary Style: Entrance - Passage - Privacy - Storeroom - Classroom.

100B SERIES KNOBSETS:
- ANSI/BHMA A156.2 series 4000, Grade 2 certified.
- UL/cUL listed for fire rated openings.
- Cylindrical lock housing made of cold rolled steel mechanisms, zinc dichromated for corrosion resistance.
- Strike: 4-7/8”x 1-1/4”.
- Door: Adjustable from 1-3/8” to 1-3/4”.
- Backset: 2-3/4”, 2-3/8” available.
- Cylinder: Supplied with rekeyable SC4 6 pin keyway standard, IC Core option accepts 6 or 7 pin Best® style cores, *WR5 rekeyable 6 pin , keyed 5 pin, accepts pins up to WR size 7.
- *WR5 - For master key system, please purchase locks less cylinder and add Ilco 15995WE26D OB cylinder.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.

100 – ENTRANCE/OFFICE:
- Pushing and turning inside button locks outside knob requiring use of key until button is manually unlocked. Pushing inside button locks outside knob until unlocked with a key or inside knob is turned. Inside knob always retracts the latch.

110 – PASSAGE:
- Both knobs always retract the latch.

120 – PRIVACY:
- Pushing inside button locks outside knob until inside knob is turned. Emergency tool can be used to unlock outside knob. Inside knob always retracts the latch.

130 - EXIT LOCK:
- Knob Inside, blank plate outside.

140 – STOREROOM:
- Outside knob never retracts the latch. Entrance by key only. Inside knob always retracts the latch.

150 – CLASSROOM:
- Outside knob is locked and unlocked with a key in the outside cylinder. The inside knob always retracts the latch.

190 - INSTITUTIONAL:
- Both levers fixed. Entrance by key in either side.

Shipping to the Squamish area

220 SERIES DEADBOLT:
- Massive 1” cUL throw adjustable backset bolt with hardened steel rod to resist sawing.
- Strike: 2-3⁄4” x 1-1⁄8” reinforced type faceplate with two 3” long screws, plus standard 4-7⁄8” x 1-1⁄4”ASA strike for metal jambs.
- Removable solid brass 6 pin cylinder with keyed 5 pin standard, IC Core option accepts 6 or 7 pin Best® style cores.
- Compatible with LSDA C500 cylinders as well as many other retrofit and high security brands.
- Accepts many after market & high security cylinders.
- Rotating collar with inserts that resist wrenching.
- All metal construction.
- All exposed components are brass or stainless steel.
- ANSI/BHMA A 156.2 series 4000, Grade 2 certified.
- UL/cUL listed, safety standards listed for 3 hour doors.
- For a wide variety of keyways other than the stocked SC1 or WR3 keyways, please see our LSDA C500 & Ilco 15995 Universal Cylinders.

220 SERIES ADJUSTABLE BOLTS & THICK DOOR PACKAGE:
- 2-1/4” Thick Door Package.
- Adjustable 2-3/8” to 2-3/4” Bolt for Series 220 & 225.

MAXIMUM SECURITY BOLTS:
- Maximum security bolt provides for excellent security even when a gap exists between the door & frame.
- Laminated bolt provides more strength than one piece design.
- Replacement for existing aluminum door flip & hook bolts.
- Case size: 7/8” x 6-13/16”.
- Flip bolt: 5/8” x 1-3/8” throw for swinging doors.
- Hook bolt: 5/8” x 13/16” throw for sliding doors.
- Includes both clear & brown anodized aluminum faceplates.
- Bolt - Backset.
- Hook - 1-1/8”.
- Hook - 31/32”.
- Flip - 1-1/8”.
- Flip - 31/32”.

DEADLATCHES:
- Replacement for existing aluminum door latches.
- Case size: 7/8” x 6-13/16”.
- Latch bolt: 5/8” x 1” x 5/8” throw.
- Deadpin prevents the latch bolt being shimmed open.
- Hold back function allows the latch to be “dogged” during store opening times.
- Simply hold latch in and turn key backwards to “dog” the latch.
- Includes both clear & brown anodized aluminum faceplates.
- Handing: “Quick Change” reversible handing - pull the latch and turn clockwise to change handing.

BACKSET - HAND:
- 1-1/8” - Reversible.
- 31/32” - Reversible.

DEADLATCH LEVER HANDLES:
- Works with aluminum door deadlatches such as the LSDA 4510 Series.
- Handle is designed to fit the hand and allow for minimum force to open the deadlatch.
- Reversible cam disc included.

FINISH:
- Aluminum.
- Duranodic.

DEADLATCH PADDLE HANDLES:
- For aluminum door latches on both outswing and inswing doors.
- Reversible cam disc included.
- Both Push & Pull stickers included which allows for: Push to Right, Push to Left, Pull to Right or Pull to Left.

FINISH:
- Aluminum.
- Duranodic.
- Aluminum.

ThumbTurns, Rim Cylinders & Mortise Cylinders all fully stocked and ready for shipping to the Squamish area.

1” MORTISE DUMMY CYLINDERS:
FINISH:
- Duranodic.
- Satin Chrome.

THUMBTURN MORTISE CYLINDERS: LENGTH - FINISH:
- 1"- Bright Brass.
- 1" - Duranodic.
- 1" - Satin Chrome.
- 1-1/4" - Bright Brass.
- 1-1/4” - Duranodic.
- 1-1/4” - Satin Chrome.
- 1-1/8” - Satin Chrome.

RIM CYLINDERS:
- Horizontal or vertical tailpiece installation.
- 5 pin standard, drilled for 6 pin applications.
- Rekeyable to original manufacturer’s systems.
- Supplied with trim ring, mounting plate & connecting screws.
- Breakoff tailpiece allows for cylinders to be used for different door thicknesses.
* COMPOSITE (COMP) WORKS WITH SCHLAGE C-K & 1170C (HOLLYMADE).

KEYWAY - FINISH:
- Arrow - Satin Chrome.
- Corbin 60 - Satin Chrome.
- Kwikset - Satin Chrome.
- Sargent LA - Satin Chrome.
- Schlage C - Bright Brass.
- Schlage C - Satin Chrome.
- Schlage E - Satin Chrome.
- Schlage Comp* - Duranodic.
- Schlage Comp* - Satin Chrome.
- Weiser - Duranodic.
- Weiser - Satin Chrome.
- Yale 8 - Satin Chrome.

B660 SERIES GRADE 1 COMMERCIAL DEADBOLTS SHIPPING TO THE SQUAMISH AREA:
- 1” throw high-strength steel alloy deadbolt with hardened steel roller resists sawing and kick-in attacks.
- Wood frame reinforcer protects wood jamb against kick-in attacks.
- Reinforcer is concealed under strike and is anchored to jamb by two 3” screws.
- Free-spinning solid cylinder collar resists wrenching and prying.
- Large inside thumbturn makes it easy to throw and retract deadbolt.
- Keying: KD standard, 6 pin cylinder keyed to 5.
- Metal shield protects bolt from ice-pick attack through door.
- Hardened steel balls protect mounting bolts from drill attack.
- Backset: 2-3/4”.

CLASSROOM:
- Deadbolt thrown only by key outside; retracted by key outside or thumbturn inside.

KEYWAY - FINISH:
SINGLE CYLINDER:
- C Keyway - Polished Brass.
- C Keyway - Satin Chrome.

DOUBLE CYLINDER:
- C Keyway - Polished Brass.
- C Keyway - Satin Chrome.

SINGLE CYLINDER: CLASSROOM:
- C Keyway - Satin Chrome.

B SERIES THIMBLE STRIKE, BOLTS & TAILPIECES:
THIMBLE STRIKE: DESCRIPTION - DIAMETER - FINISH:
- Circular Drive-In, Thimble Strike Plate - 1-3/8” - Zinc.

DEADLATCHES FOR B250 SERIES: BACKSET - FACE - DIAMETER - FINISH:
- 2-3/8” - -1-1/8” x 2-1/4” - 1” - Polished Brass.
- 2-3/8” - 1-1/8” x 2-1/4” - 1” - Satin Chrome.
- 2-3/4” - 1-1/8” x 2-1/4” - 1” - Satin Chrome.

BOLTS BOLT FOR B500 SERIES:
- Adjustable - 1-1/8” x 2-1/4” - 1” - Polished Brass.
- Adjustable - 1-1/8” x 2-1/4” - 1” - Satin Stainless.

BOLTS & DRIVE-IN FOR B600, 700, 800 SERIES:
- 2-3/8” - 1-1/8” x 2-1/4” - 1” - Polished Brass.
- 2-3/8” - 1-1/8” x 2-1/4” - 1” - Satin Chrome.
- 2-3/4” - 1-1/8” x 2-1/4” - 1” - Satin Chrome.
- 5” - 1-1/8” x 2-1/4” - 1” - Satin Chrome.

TAILPIECES: DESCRIPTION - FOR
- 1-5/8”, 1-3/4”, 3” Standard Tailpiece - B252, B462 012161.
- 2”-2-1/2” Tailpiece - 662.

MORTISE CYLINDER CAMS:
CLASSIC & CONVENTIONAL:
- Adams Rite MS 4500 & 4700.
- Yale 2160, Arrow #004, Sargent 13-0660.
- L400, 9000 Series.

EVEREST & PRIMUS:
- Adams Rite MS, 4500 & 4700.
- Standard, L9060 Only.
- L400, 9000 Series.

MODULAR CYLINDER CAMS:
- Corbin Russwin DL4000 1-1/8”, 1-3/8” & 1-5/8”.
- Corbin Russwin ML2200 1-1/8”, 1-3/8” & 1-5/8”.
- Adam’s Rite Kit for 1-1/8”, 1-3/8” & 1-5/8”.
- L Series for Cylinder 1-1/8”, 1-3/8” & 1-5/8”.
- L Series for Cylinder 1-1/4”, 1-1/2” & 1-3/4”.
- L9060 Straight Cam for 1-1/8”, 1-3/8” & 1-5/8”.

KEY BLANKS:
EVEREST 29 PRIMUS XP:
- 6 Pin S123, Level 8.
- 6 Pin S123.
- 6 Pin S145, Master Key.

Everest:
- 6 Pin C123.
- 6 Pin C145, Master Key.

CLASSIC:
- 5 Pin C.
- 5 Pin E.
- 6 Pin C.
- 6 Pin CE.
- 6 Pin E.
- 6 Pin EF.
- 6 Pin F.
- 6 Pin G.
- 6 Pin T.

CONTROL KEY BLANKS:
- C.
- E.

1000 SERIES KNOB PUSHBUTTON LOCKS SHIPPING TO SQUAMISH & AREA:
- Ideal for limiting access in high-traffic areas.
- Heavy duty cylindrical lock housing conforms to DOD 5220.22M.
- Door thickness: 1-3/8" to 2-1/4".
- Non-handed: Field reversible.
- Minimum stile required for mounting: 5".
- Dimensions: Front housing - 7-3/8"L x 3-1/8"W x 3-13/16"D.
- Latch/Backset: UL/ULC 3-hour rated 1/2" throw latch bolt with 2-3/4" backset and floating faceplate.
- Key override models accept removable core cylinders.
- Removable core cylinders not supplied with lock.
- Stock in satin chrome.

1011:
- Exterior access by combination.
- Egress by interior knob.

EE1011 / E1011:
- Combination entry both sides.

1021:
- Exterior access by combination or key override.
- Egress by interior knob.
- Cores not included, stock in satin chrome.

1031:
- Exterior access by combination or passage feature.
- Interior has passage feature - thumbturn & key.
- Egress by interior knob.

1041:
- Exterior access by key combination, key override, or passage feature.
- Interior has passage feature - thumbturn & key.
- Egress by interior knob.
- Cores not included.

KEY OVERRIDE:
- Allows a facility to maintain or initiate a keyed-alike security system with the same key system already in use. The key is normally only in the hands of security or management personnel and will override the lock’s combination to gain entry.

PASSAGE FEATURE:
- Allows access without using the entry code (keeps the door unlocked even while closed). This function is on the inside of the door, and can be activated by either a thumbturn or a key (Thumbturn and key included with all passage feature models).

FUNCTION:
Standard - Combination Both Sides - Passage - Combination Entry with Key Override.

CORE TYPE:
- Best Type Key Override.
- Corbin Key Override.
- Medeco/Assa/Yale/Abloy Key Override.
- Sargent Key Override.
- Schlage Key Override.
- Schlage Key Override with Passage.

L1000 SERIES LEVER PUSHBUTTON LOCKS:
- Designed for high frequency use, wherever limited access is required.
- Single access code, one easy-to-manage code for all users.
- Easily programmed via keypad.
- Door thickness: 1-3/8” to 2-1/4”.
- Weather resistant.
- Vandal resistant, solid metal pushbuttons.
- Backset: 2-3/4”.
- 1/2” throw latch.
- 3-hour UL/ULC fire rating on “A” labeled doors.
- Minimum stile: 5”.
- Removable core cylinders not supplied with lock.

L1011:
- Exterior access by combination.
- Egress by interior lever.

L1021:
- Exterior access by combination or key override.
- Egress by interior lever.

L1031:
- Exterior access by combination or passage.
- Interior access without using the lock entry code: Activated from the inside with a thumbturn or key.
- Egress by interior lever.

PASSAGE SET OPTION:
- The key cylinder (A) shown is the standard control for changing combinations on the Kaba Simplex series 1000 & L1000. The optional passage set (B), shown below the key cylinder, allows the lock to be opened without using the push-button combination. This is valuable when a door is to be left unlocked for extended periods. The optional passage set comes ordered with a thumbturn activator, as shown, or with a key cylinder activator.

COMBINATION CODE ENTRY:
- Core Type - None LH / LHRB.
- Core Type - None LH / LHRB.
- Core Type - None RH / RHRB.

COMBINATION CODE ENTRY WITH PASSAGE:
- Core Type - None LH / LHRB.
- Core Type - None RH / RHRB.

COMBINATION ENTRY WITH KEY OVERRIDE:
- Best/Equivalent - 6 or 7 Pin - LH / LHRB.
- Best/Equivalent - 6 or 7 Pin - RH / RHRB.
- Corbin Russwin LH / LHRB.
- Corbin Russwin RH / RHRB.
- Medeco.ASSA/Yale/Abloy - 5 or 6 Pin - LH / LHRB.
- Medeco.ASSA/Yale/Abloy - 5 or 6 Pin - RH / RHRB.
- Sargent LH / LHRB.
- Sargent RH / RHRB.
- Schlage LH / LHRB.
- Schlage RH / RHRB.

All in stock and waiting for your Squamish orders.

LP1000 SERIES EXIT DEVICE CONTROL LEVER PUSHBUTTON LOCKS:
- Replaces key cylinder on new or existing surface mounted exit devices.
- Single access code, one easy-to-manage code for all users.
- Operation modes: Pushbutton access, and exit device may be “dogged” without affecting the LP1000.
- Easily programmed via the keypad.
- Vandal resistant, solid metal pushbuttons.
- Exit device hub rotation: Up to 60°, counterclockwise for left hand and clockwise for right hand.
- Tailpiece: 2-3/4 tailpiece for exit device operation from outside.
- Minimum stile: 5”.
- Door thickness: 1-3/8” to 2-1/4”.
- Weather resistant.
- 3 hour UL/ULC fire rating for “A” labeled doors.
- Finish: Satin chrome.

COMPATIBLE WITH MOST LEADING BRANDS OF RIM EXIT DEVICES (EXIT DEVICE NOT INCLUDED):
- Black & Decker (K-12) QED111/112 - Cal Royal 5000/F5000 - Detex Advantex series 10, 20, 21, 40, 50, 51 - Detex 10/F10 series - Dorex 8500R/8500F - Dorex 9500PR/9500FR - Dorma 9100, 9300 - Monarch XX-R*, FXX-R, 18-R*, F-18-R*, 17-R, F-17-R, XX-V*, F-XX-V*, 18-V*, F-18-V*, F-XX-V*, 11-R*, 11-V* - Von Duprin 22, 88 NL, 98, 99, 900, 2227, 9827, 9847, 9847 WDC, 9848, 9857, 9927, 9947, 9947, WDC, 9948, 9957, 90027, 90047, WDC, 90057 *(requires special K-Hub Adapter Kit).

CORE TYPE:
- None LH / LHRB.
- None RH / RHRB.
- Best/equivalents - 6 or 7 Pin - LH / LHRB.
- Best/equivalents - 6 or 7 Pin - RH / RHRB.
- Medeco/Assa/Yale/Abloy - 5 or 6 Pin - LH / LHRB.
- Medeco/Assa/Yale/Abloy - 5 or 6 Pin - RH / RHRB.
- Schlage LH / LHRB.
- Schlage RH / RHRB.

2015 SERIES EXIT DEVICE CONTROL LEVER PUSHBUTTON LOCK:
- Single access code, easily programmed via keypad, 6 pin tumbler cylinder keys for combination change access.
- Minimum stile: 3-1/8”.
- Non-handed.
- 2-3/4” adjustable tailpiece for exit device operation from outside.
- Exit device hub rotation: Adjustable up to 90° clockwise for right hand.
- Weather resistant.

COMPATIBLE WITH MOST LEADING BRANDS OF RIM EXIT DEVICE (EXIT DEVICE NOT INCLUDED):
- American Device 6300, 6303 series - Corbin Russwin 21, 22, 25, 26NT, 27K, 29, 29-1/4, 29M2, 29-1/2M2, 29NTM2, 29D20, LA29, 39, 39EL, 39LLD, 390, LA39, 365, 3651/4, LT365, 370, 372, LA372, 375, LT375, 377, 382, 384, 385, 388, 572, 572EL, 572ELD, U572, LA572 - Detex Advantex series 10, 20, 21, 40, 50, 51 - Dorex 8500R/8500F - Dorex 9500R/9500FR - Magno Krom LHR only: 500-4, 550-4, 650-4,1500-4, 1550-4, 1650-4; RHR only: 600-3 - Monarch 18RBA, 18RP, 18VP, F18RBA, F18RP, F18VP, FXXRBA, FXXRP, FXXVP, XXRBA, XXRP, XXVP - Precision Hardware FL-D103; RHRB only 810-H; RH or LH: 103, R103, D203, H-203, 1103, D1203, H1203 - Sargent 2813, 2804, 6804, 12-6804, 9804RHRB, 12-9804LHRB, 9898E, 9898K - Von Duprin 22 Rim, 22 Rim-F, 88 Rim, 88 Rim-F, 98 Rim, 98 Rim-F, 99 Rim, 99 Rim-F; 2227, 2227-F, 9827, 9827-F, 9847, 9847-F, 9927-F, 9947-F - Yale 1500, 7000 series.

DOOR THICKNESS:
1-3/8” to 2-1/2 Satin Chrome.

3000 SERIES NARROW STILE PUSHBUTTON LOCKS:
- Provides exterior access by combination entry, key overrride, passage and lockout.
- Works with Adams Rite 4510/4710/4910 mortise latch.
- Single access code.
- Easily programmed via keypad.
- Non-handed, field reversible.
- Accepts Maximum Security (MS) mortise cylinders.
- Vandal resistant, solid metal pushbuttons.
- Minimum stile width: 1-7/8”.
- Door thickness: 1-3/4”.
- Cylinder not included.
- Drive assembly required.

DRIVE ASSEMBLIES:
- RH / RHRB 31/32".
- LH / LHRB 31/32".
- RH / RHRB 1-1/8" or 1-1/2”.
- LH / LHRB 1-1/8" or 1-1/2”.

5000 SERIES EXTRA HEAVY DUTY PUSHBUTTON LOCKS:
- Ideal for controlling access to high traffic, security sensitive areas in a commercial, industrial, educational, governmental, lodging, and multi unit residential setting. Perfect for locations with a high user turnover rate such as data processing centers, employee entrances, R&D labs, apartments, dormitories, and restricted areas in hospitals and airports.
- Single access code, one easy-to-manage code for all users.
- Key override.
- Easily programmed via keypad.
- ANSI/BHMA A156.2, Grade 1 certified.
- Weather resistant, indoor/outdoor approved.
- 3 hour UL/ULC fire rating for “A” label doors.
- Vandal resistant, metal pushbuttons.
- Non-handed.
- Door thickness: 1-3/8” to 2-1/4”.
- Minimum stile: 5”.
- Backset: 2-3/4”.
- 1/2” throw latch, floating faceplate.

TAILPIECES FOR COMPATIBILITY WITH:
- Abloy 5277 - Abloy 5477 - Arrow C100 - ASSA 65611 - ASSA 65691 - Corbin Russwin 2000-03 - Kaba 1539 - Kaba 1599 - Kaba Gemini 4730 - Kaba Peaks 1099 - Marks - Medeco 20W200H1 - Sargent 10 Line - Schlage 23-001 - Schlage Primus 20-760.

KEYWAYS:
Kaba 90 - SC4.

7100 SERIES AUXILIARY LOCKS:
- Provides fully mechanical primary or auxiliary pushbutton access control by exterior combination.
- Single access code, one easy-to-manage code for all users.
- Easily programmed via keypad.
- Vandal resistant, solid metal pushbuttons.
- Weather resistant.
- Handing: Field reversible.
- Minimum stile: 4”.
- Covers 2-1/8” holes.
- Door thickness: 1-3/8 to 2-1/4”.

7102 & 7108:
- Ideal for front and rear residential/commercial doors.
- Must be manually relocked.
- Flat deadbolt strike plate.

102 19 41:
- Body is black and inside plates are satin chrome.

7104:
- Perfect for storage areas, offices, etc.
- Relocks automatically when door closes.
- Curved lip strike plate.

FINISH - BACKSET:
1” TUBULAR DEADBOLT:
- Bright Brass - 2-3/4”.
- Black/Chrome - 2-3/4”.
- Satin Chrome - 2-3/4”.
- Bright Brass - 2-3/8”.
- Satin Chrome - 2-3/8”.
- Bright Brass - Adjustable 2-3/8” to 2-3/4”.
- Satin Chrome - Adjustable 2-3/8” to 2-3/4”.

REPLACEMENT DEADBOLT:
- Satin Chrome - 2-3/4”.

6200 SERIES LATCH LOCKS:
- Single access code, one easy-to-manage code for all users.
- Easily programmed via keypad.
- All metal cast front housing, force-resistant, clutch-protected exterior thumbturn, unified interior trim plate, fixed interior knob.
- Vandal resistant, solid metal pushbuttons.
- Front housing: 5-7/8”L x 2-3/4”W x 2-9/16”D.
- Door thickness: 1-3/8” to 2-1/4”.
- Backset: 2-3/4”.
- 1/2” throw latch, floating face plate.
- UL listed: 3 hour fire rating for “A” labeled doors.
- Weather resistant.

FINISH:
- Gold Tone Power Paint.
- Gray Powder Paint.

All in stock and ready for shipping to Squamish and area.

MORTISE CYLINDERS:
- Exact pinning specifications as original systems.
- Solid brass construction.
- Satin chrome finish.

M100:
- Drilled & pinned 5.
- Includes AR cam.

M118:
- Drilled 6, pinned 5.
- Includes both AR & STD cams.

LENGTH - KEYWAY - PIN:
- 1” - Schlage C - 5.
- 1” - Weiser - 5.
- 1-1/8” - Corbin 60 - 5.
- 1-1/8” - Corbin L4 - 6.
- 1-1/8” - Sargent RA - 6.
- 1-1/8” - Russwin D1 - 6.
- 1-1/8” - Sargent LA - 6.
- 1-1/8” - Sargent LA~LD - 6.
- 1-1/8” - Schlage C - 5.
- 1-1/8” - Schlage E - 6.
- 1-1/8” - Schlage F - 6.
- 1-1/8” - Schlage C~K - 5.
- 1-1/8” - Weiser - 5.
- 1-1/8” - Yale 8 - 5.
- 1-1/8” - Yale GA - 6.

RIM CYLINDERS:
- Exact pinning specifications as original systems.
- Solid brass construction.
- Tailpiece converts between horizontal & vertical positions.
- Screw-on retaining cap design.
- Satin chrome finish.
- Drilled 6, pinned 5.

KEYWAY:
- Sargent LA.
- Sargent LA~LD.
- Schlage C.
- Schlage C~K.
- Weiser.

KNOB/LEVER/DEADBOLT CYLINDERS:
- Exact pinning specifications as original systems.
- Solid brass construction.
- Fits Schlage knobs, levers, deadbolts and Yale levers.
- Drilled for 6 pin.
- Supplied with 5 tailpieces.
- Screw-on retaining cap design.
- Satin chrome finish.

KEYWAY - PIN:
- Corbin 60 - 5.
- Corbin L4 - 5.
- Sargent RA - 6.
- Corbin D1 - 5.
- Sargent LA - 6.
- argent LA~LD - 5.
- Schlage C - 5.
- Schlage E - 5.
- Schlage F - 6.
- Schlage C~K - 5.
- Weiser - 5.
- Yale 8 - 5.
- Yale GA - 6.

MX SERIES CYLINDERS - PROPRIETARY KEYWAYS:
* SIGNED DEALER AGREEMENT REQUIRED:
- Anti-picking mushroom pins.
- Schlage® pinning specifications.
- Proprietary keyway.
- Zero-bitted.
- Cylinders: Sold less key blanks.

K001 MX:
- Easy retrofitting of Schlage deadbolt, knob or lever cylindrical locksets and Yale levers.

LENGTH - PIN:
MORTISE CYLINDER:
- 1” - 5.
- 1-1/8” - 6.

RIM CYLINDER:
- 1-1/8” - 6.

KNOB / LEVER / DEADBOLT CYLINDER:
- 6.

KEY BLANKS:
DESCRIPTION - PIN:
- Polished Brass Key Blank - 5.
- Polished Brass Key Blank - 6.

Yes we do ship to Squamish and area!

CABINET ELBOW CATCH:
- Made of cast brass or bronze.
- Ideal for use on the inactive leaf of cabinet doors.
- Supplied with screws.
- Catch size: 1-3/8” x 5/8”.
- Strike size: 1-3/16” x 5/8”.
FINISH:
- Satin Chrome.

CYLINDER PULL:
- 1-1/4” hole for mortise or rim cylinder.
- Cast brass or bronze base material.
- 2-3/4”H x 1-7/8”L.
FINISH:
- Satin Chrome

FLUSH BOLT:
- Base material: brass.
- Face size: 1” x 6-3/4”
- Keeper size: 1” x 2-1/4”
- Guide: 7/8” x 2-1/4”
- Extension length: 12” (length measured from centre of operating lever to end of bolt when in retracted position).
FINISH:
- Satin Chrome

CAST WALL STOPS:
- All fasteners included.

GSH231:
- For use with most locksets.

GSH250B:
- For use on locksets with push-in locking button.
FINISH - DIAMETER - PROJECTION
- Satin Chrome 2-3/8” 1”
- Satin Chrome 2-1/2” 1”

FLOOR STOPS:
GSH200 C26D: low profile door stop.
MATERIAL: Cast.
SIZE: 1-3/4”D x 1-1/8”H.

GSH201: Door Stop Riser.
MATERIAL: Cast.
- Raises GSH200 or GSH218 higher for larger door gaps.

GSH218: Standard Profile Door Stop.
MATERIAL: Cast.
SIZE: 1-3/4”D x 1-3/8”H.

GSH281: Standard Profile.
- Heavy duty floor stop made of cast brass or bronze.
SIZE: 2-3/4”H x 2-5/8”L x 1-5/8”W.
- Machine bolts with shields supplied.
FINISH - RISE
- Brushed Chrome - 1/8”.
- Brushed Chrome - 1/2”.
- Brushed Chrome - 3/8”.
- Brushed Chrome - 2-3/4”.

DOOR PULLS & PLATES:
4009: PULL HANDLE:
- Projection: 1-1/2”.
- Centre: 9”.
- Material: 3/4”D.

80A & 81A: PROTECTIVE PLATES:
- .050 thickness for 80A & 81A plates.
- Fastening: Screw type mounting supplied with oval undercut head sheet metal screws standard, all holes countersunk.
- Beveling: All push plates supplied beveled four sides standard.
- 80A packed individually in a cardboard box to protect while shipping.
TYPE - FINISH - SIZE:
- Round Pull - Aluminum - 9”.
- Round Pull - Polished Brass - 9”.
- Round Pull - Satin Stainless - 9”.
- Pull & Plate - Aluminum - 3-1/2” x 15”.
- Kick Plate - Satin Stainless - 8” x 34”.
- Push Plate - Aluminum - 4” x 16”.
- Push Plate - Polished Brass - 4” x 16”.
- Push Plate - Satin Stainless - 4” x 16”.

HEAVY DUTY DOOR HOLDERS & STOPS:
- For heavy-duty applications.
- Non-handed.

900 SERIES: Channel is surface-mounted to the door, most often with sex bolts, and the jamb bracket is surface mounted to the jamb, requiring minimal door and frame preparation.
- Can be used in conjunction with most surface-applied door closers.
- Can be mounted for openings ranging from 85º to 110º.

HOLD-OPEN FUNCTION:
- Holds the door open at a predetermined position permitting an unobstructed traffic flow through the opening.
- Can easily be turned on or off by simply rotating the serrated knob on the bottom of the channel to engage the hold open mechanism, when flipped over it acts as a stop and shock absorber.
- Tension on the hold-open mechanism can be adjusted to offset air currents or other exterior conditions.

STOP FUNCTION:
- Provides a reliable method for shock absorbing capability.
- Can be used on fire doors.

SIZE - DOOR OPENING BUTTS - DOOR OPENING CENTER HUNG.
SURFACE MOUNT: Stop Only.
- 3 27-1/16”–33” 33-1/16”–39”.
- 4 33-1/16”–39” 39-1/16”–45”.

SURFACE MOUNT: Hold Open.
- 4 33-1/16”–39” 39-1/16”–45”.

CONCEALED MOUNT: Stop Only.
- 4 33-1/16” – 39” 45-1/16” – 51”.

DOOR STOP:
KICK DOWN HOLDER:
- Units provide an economical method to hold open doors.
- Cast of durable iron.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip; rubber shoe is securely fastened with screw, shoes are easily replaced when worn.
- Door-to-floor clearance: 2” or less.
- Plate height: 2-1/4”
- Plate width: 1-7/16”
- Meets ANSI/BHMA 156.16, L11381.

DESCRIPTION:
- Kick Down Door Stop.
- Screw Type Replacement Heel for FS544.

CONSTANT LATCHING FLUSH BOLT:
- Constant latching - inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released.
- Inactive door will relatch automatically when closed.
- Low actuation forces.
- Fits standard ANSI A115.4 door and frame preparations.
- Non-handed.
- 3/4” bolt throw with a 7/8” vertical adjustment.
- 3/4” backset.
- Standard rod length is 12”, which is measured from the center of the flush bolt body to the bolt tip.
- BODY SIZE: 1” W x 6-3/4” L x 2” D.
- Meets ANSI A156.3 type 27.
- UL listed 3 hr fire doors 8’0” x 10’0”.
DESCRIPTION:
- Metal Door Flush Bolt Set.

SURFACE BOLTS:
- Standard surface bolt has 1” throw for maximum security.
- Ideal for all types of doors.
- Fully concealed mounting prevents vandalism.
- Available in locking version: unit locks in both the up and down position - locking bolts are furnished with 2 keys in 4 keying variations.
- Units packed with wood and machine screws to meet most field conditions.
- Units available with either a universal top strike (T) or a flat bottom strike (B).
- 1630 series is constructed of heavy duty steel.
- UL listed up to 3 hours when used on the inactive door of pair up to 8’ in height.
- Meets ANSI/BHMA A156.16, L84161.
- Sex bolts available where required.
- Locking Bottom Strike.
- Locking Top Strike.
- Non-Locking Bottom Strike.
- Non-Locking Top Strike.
DESCRIPTION:
- Bottom Surface Bolt.
- Bottom Surface Bolt (Locking).
- Top Surface Bolt.
- Top Surface Bolt (Locking).

ROLLER LATCH:
- Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed.
- The projection of the roller is easily adjusted using adjusting screws on the face of the unit.
- Maximum projection of the roller is 3/8” allowing for variance in the door clearance.
- Nylon roller standard.
- Forged brass construction.
- Meets ANSI/BHMA A156.16, E19091.

BODY - STRIKE:
- 1” x 3-3/8” x 1-11/16” - RL30’s C/W Ansi Strike.

OCTOPOD PATIO DOOR LOCK:
- Ideal for sliding patio doors, sliding windows, swinging doors, double doors, french doors & other applications.
- Can be used on narrow stile doors and frames with a width of only 1-5/8”.
- Lock housing accepts standard 1-1/8” mortise cylinder (not included) allowing it to be keyed to other locks in a system.
- Mounts at top or bottom of door.
- Equipped with a 3/8” diameter x 9” long locking bolt with a 2-3/8” throw standard.
- Other models available by special order for Assa & Medeco cylinders and finishes other than the standard aluminum finish.

KEE BLOK LOCKOUT SHROUD:
- Blocks all existing keys to knob locks or padlocks in seconds.
- Fits 90% of knob locks as well as many popular models of padlocks.
- Compact unit is constructed of high strength aluminum alloy.
- A model is also made for lever handles and is available by special order.

KEYING:
- KA MMC2.
- KD.

CROSS BORE RELOCATION DRILL GUIDE:
- Easy way to correct a mis-drilled cross bore or to relocate a backset from 2-3/8” to 2-3/4” or vice versa.
- Remove existing lock and install the HIT-23 in the latch hole. Re-drill using a hole saw with the drill blank installed.
- For both 1” and 1-1/8” face plates with a 1” diameter latch hole.
- Solid steel construction.

All in stock and ready to rock! We ship to Squamish and area.

JAMB JACKETS:
- Door jamb reinforcer repairs and covers damaged and split out door jambs damaged by a break-in without the expense of replacing the whole jamb.
- Manufactured from sheet metal approximately 1/16” thick for 1-3/4” doors.
- 1-3/8” available by special order.
- Adds reinforcement to undamaged jambs for additional security.
- Designed to cover standard 1/2” rabbeted jamb.
- Finished in beige powdercoat for durability, may be repainted to match existing colour scheme.
- Recessed to accommodate T-strike except JJE model.
LENGTH:
- 24”.
- 36”.

HOLLOW METAL DOOR BRACKETS:
LMB01:
- For installing cylindrical knob locks or dead-bolts on hollow metal doors.
- Made of 12 gauge cold rolled steel.
- Supplied with adhesive template and pop rivets for convenience & accuracy.
- Center cut-out for seamed doors.

LMB02:
- As above for mortise locksets.

LMB03:
- For hollow metal or aluminum door & frames (set of 2).

APPLITCATION:
- Cylindrical Knob & Deadbolt.
- Standard Mortise Locks.
- Metal, Aluminum Door & Frames.

“PIT BULL” LATCH EMBOSS TOOL:
- For latch installations on 18 & 20 gauge hollow metal steel doors, this tools creates a rectangular formed pocket at the edge of the door.
- A few turns with a wrench will squeeze an indentation that will accept both 1” and 1-1/8” wide by 2-1/4” high latches.
- Not for seam doors.

STOP KICK DOWN:
- Zinc cast door stop finished in chrome.
- Size 4-3/4” from pivot point.
- Furnished with rubber tip.

WIND CHAIN STOP:
- Heavy-duty steel welded chain.
- Two compression coil springs.
- Zinc die-cast mounting brackets.
- Grey vinyl cover.
- Finish: Zinc plated.
LENGTH:
- 25-1/2”.

LATCH GUARDS:
LG111:
- Non-handed unit for narrow stile aluminum glass doors.

804:
- Non handed unit has a cutout for knob rose.
- Fastened with 4 thru-bolts.
TYPE - FINISH:
- Key-In-Knob - Cadmium.
- Narrow Stile - Aluminum.
- Narrow Stile - Duronodic.

ASA STRIKES:
- Meets the ASA strike specification size of A115.2 of 4-7/8”H x 1-1/4”W.
- Used for knob & lever sets in commercial applications.
TYPE - FINISH:
- Standard - Brushed Nickel.
- Standard - Polished Brass.

Shipping to Squamish and area locations.

KNOB & LEVER GUARD:
- Designed to prevent “wrenching” of knobs & levers.
- Made of aircraft aluminum and powder coated for long life.
- Built in handle allows the door to easily be opened.
FOR:
- Knob.
- Lever.

SECRET GATE LATCH:
- For dutch door applications and counters.
- Case size is 2” x 2-3/8” with 3/4” strike.

CABINET HANDLES - ‘T’ & ‘L’:
- Handles can be used for a variety applications including storage cabinets, locking containers, truck caps & garage doors.
TYPE - FINISH - FASTENING - CENTERS:
- T - Silver - Back - 1-1/2”.
- T - Black - Thru-Bolt - 1-1/2”.
- T - Silver - Thru-Bolt - 1-1/2”.
- L - Silver - Thru-Bolt - 1-3/4”.

FREEZER HANDLES:
1 0056 L06021:
- Bolt-type tongue provides positive locking action.
- Optional adjustable roller strike.
- Can be locked with a padlock (not included).

1 0173 C00004:
- Positive latching keeps door shut tight; guards against pop-opens.
- Cylinder locking with strike.
- Two-way adjustment compensates for door sag and gasket wear.
- Replaces discontinued National C8765 unit.
DESCRIPTION:
- Handle.
- Strike For 1 0056 L06021.
- Freezer Handle.
- Strike For 1 0173 C00004.
- Cylinder For 1 0173 C00004.

PADBOLTS & BARREL BOLTS:
168K:
- 5” extra heavy duty bolt accepts padlock.
- Padlock hole is 1/2”.
- 1-3/4” bolt throw.

201A:
- Solid brass barrel bolt.
- 19/32” throw.
- Multiple sizes available.

1068:
- 4-1/2” heavy duty bolt accepts padlock.
- Padlock hole is 15/32”.
- 1-3/4” bolt throw.

MATERIAL - LENGTH:
- Zinc - 5”.
- Brass - 2”.
- Brass - 2-1/2”.
- Brass - 3”.
- Zinc - 4-1/2”.

PUSH & PULL PLATES:
1410:
- Push/pull plate combination with a 9” pull mounted on a 4” x 16” push plate.
- Aluminum finish.

H1413:
- Pull handle only.

DESCRIPTION:
- Push Pull Handle Set.
- 9” Pull Handle Only.

FLUSH BOLTS:
- For keeping the inactive door of a pair of doors stationary.
- DC840 supplied in pairs.
- DC860 sold individually.
FOR - HEIGHT - WIDTH - THROW
- Steel - 6-1/4” - 1’ - 5/8’.
- Aluminum - 5-1/4” - 15/16” - 5/8”.

REPLACEMENT DEADBOLT & DEADLATCH:
DESCRIPTION - FINISH:
G3 5" Deadbolt for Dorex - Stainless Steel.
G3 5" Deadlatch for Dores - Stainless Steel.

CYLINDER & CYLINDER GUARD:
732:
- 1” cylinder for Adams Rite narrow stile locks supplied with trim ring.

5510:
- Heavy aluminum plate attaches to door with 4 steel 3/16” pop rivets (included).
- 1/4” cylinder recess.
- Measures: 4-1/32”H x 1”W.
DESCRIPTION:
- Mortise Round Turn Cylinder.
- Cylinder Guard.

CURVED SHIMS:
- Facilitates removing a plug from a cylinder when the original keys are not available.
- Package of 25.

RIOPEL MAILBOX PARTS:
- P. Riopel manufactures a full line of products for residential, commercial, office and institutional buildings. All of these products are available by special order from IDN Canada. Call for technical assistance, shop drawings or pricing.

3950 & 3953:
- Mailbox includes spring clip for mounting.
- For 1000, 2000 & 3000 series mailbox units.

R115:
- Switch box accepts Crown Lock (supplied by Canada Post).
- Size: 6”H x 2-3/8”W.
DESCRIPTION - FINISH:
- Mailbox Lock - Nickel.
- Mailbox Lock - Nickel.
- 1000 & 2000 Door - Stainless Steel.
- Crown Lock Switch Box - Grey Enamel.

If you need installation or repair services, one of our affiliate companies below will be glad to help

Installation or repair services provided by:

Click any one of the below logos for direct access to one of our service repair and installation providers.

Not all areas have local mobile service. Service call travel charges may apply to the Squamish area.